Brother MFC-9460CDN - Page 60

2-21
Confidential
8D Paper jam occurred around the
back cover at the time when the
power was turned ON, or the
back cover is open.
2-71
8E Error in the adjustment of
inter-color position alignment
result when implementing it.
2-72
8F Detection of abnormal value of
registration sensor sensitivity
when implementing adjustment
of inter-color position alignment.
2-72
90 The paper size of the MP tray
does not match that of the print
setting.
2-73
91 The paper size of the paper tray
1 does not match that of the
print setting.
2-73
92 The paper size of the paper tray
2 does not match that of the
print setting.
2-73
93 No paper in MP tray. 2-73
94 No paper in paper tray 1. 2-73
95 No paper in paper tray 2. 2-73
96 No paper in all trays. 2-73
97 A paper size, which is not
supported by the paper tray 1, is
specified in the paper size of the
data.
2-74
98 A paper size, which is not
supported by the paper tray 2, is
specified in the paper size of the
data.
2-74
99 The tray in which unsupported
paper size is loaded is selected
for duplex printing.
2-74
9A No paper is loaded in the MP
tray (MP paper empty sensor
fails to be turned ON.)
2-74
Error
codes
Problem
Refer
to:
9D Detection of incorrect registration
sensor measurement value when
implementing adjustment of
inter-color position alignment.
2-75
9E Toner of the color which is being
used reaches the end of life
when implementing adjustment
of inter-color position alignment.
2-75
9F No paper is loaded. 2-76
A0 Timeout error during waiting for
completion of second side
scanning data transfer.
2-76
A1 The front cover is open. 2-77
A2 During scanning, 90 cm or
longer of a document is
detected.
2-77
A3 The document first side rear
sensor does not detect the lead-
ing edge of a document
although the document is fed
farther than a designated
distance.
2-78
A4 The ADF cover is open. 2-78
A5 Scanning failure upon FAX
transmission (First side)
(Document scanner unit failure
for the first time.)
2-79
A6 Scanning failure upon FAX
transmission (First side)
(Document scanner unit failure
for the second time or later.)
2-79
A7 Scanning color parameter file
failure.
2-79
A8 Scanning color parameter error
for recording the image.
2-79
A9 An image signal cannot be
detected when an image is
scanned. Or, an image signal is
too dark.
2-80
AA Document scanner unit cover
open detection error.
2-80
Error
codes
Problem
Refer
to: