Brother MFC-9460CDN - Page 178

170
Level 1 Level 2 Level 3 Options Descriptions Page
0.Initial Se tup 1.Receive Mode — Fax Only*
Fax/Tel
External TAD
Manual
Chooses the receive
mode that best suits
your needs.
33
2.Date&Time 1.Date&Time — Puts the date and
time on the LCD and
in headings of faxes
you send.
See
2
.
2.Daylight Save On
Off*
Changes for Daylight
Savings Time
manually.
See
1
.
3.Time Zone UTCXXX:XX Sets the time zone
for your country.
See
3
.
3.Station ID — Fax:
Tel:
Name:
Sets your name and
fax number to appear
on each page you
fax.
See
2
.
4.Tone/Pulse
(not available in
New Zealand)
— Tone*
Pulse
Chooses the dialling
mode.
4.Dial Tone
(for New Zealand)
5.Dial Tone
— Detection
No Detection*
You can shorten the
dial tone detect
pause.
142
5.Dial Prefix
(for New Zealand)
6.Dial Prefix
— — Sets a prefix number
that will always be
added before the fax
number every time
you dial.
See
1
.
6.Reset
(for New Zealand)
7.Reset
1.Network 1.Reset
2.Exit
Restores all network
settings to factory
default.
See
3
.
2.Address & Fax 1.Reset
2.Exit
Restores all stored
phone numbers and
fax settings.
150
3.All Settings 1.Reset
2.Exit
Restores all the
machine settings to
factory default.
150
1
See Advanced User's Guide.
2
See Quick Setup Guide.
3
See Network User's Guide.
The factory settings are shown in Bold with an asterisk.