Brother MFC-9460CDN Basic User's Guide

Chapter 6
46
Turning on the Remote Codes 6
You need to turn the Remote Codes setting to
on to use the Fax Receive Code and
Telephone Answer Code.
a Make sure you are in Fax mode .
b Press Menu 2, 1, 4.
c Press a or b to choose On.
Press OK.
d If you do not want to change the Remote
Activation Code, press OK.
e If you do not want to change the Remote
Deactivation Code, press OK.
f Press Stop/Exit.
Changing the Remote Codes 6
The preset Remote Activation Code is l51
(l91 for New Zealand). The preset Remote
Deactivation Code is #51 (#91 for
New Zealand). If you are always
disconnected when accessing your External
TAD, try changing the three-digit remote
codes, for example ### and 555.
a Make sure you are in Fax mode .
b Press Menu, 2, 1, 4.
c Press a or b to choose On or Off.
Press OK.
d If you chose On in step c, enter the new
Remote Activation Code.
Press OK.
e Enter the new Remote Deactivation
Code.
Press OK.
f Press Stop/Exit.

Brother MFC-9460CDN Specifications

General

Type	all in one
Color	black
Automatic Document Feeder Capacity	35 sheets
Paper Size	plain paper, thin paper, thick paper, thicker paper, recycled paper, bond, label, envelope, thin envelope, thick envelope, glossy paper
Paper Handling	up to 300 sheets
Color Print Speed	25 pages per minute
Mono Print Speed	25 pages per minute
Print Resolution Mono	up to 2400 x 600
Print Resolution Color	up to 2400 x 600
Maximum Number of Pages Per Month	up to 40, 000
Scan Resolution	up to 1200 x 2400
Copier Resolution Mono	up to 2400 x 600
Number Of Cartridges	4
Internal Memory	yes
Memory Card	no
Network	wired
Connectivity	usb 2.0
OS Compatibility	none
Mobile Devices Connection	yes

Weight and Dimensions

Height	19.4 inches
Width	19.8 inches
Net Weight	58.4 pounds