What to do if my Brother Printer says 'No Belt Unit'?
If your Brother Printer is displaying 'No Belt Unit', it means that the belt unit is not installed correctly. Re-install the belt unit to resolve this.
How to fix 'Fuser Error' on my Brother Printer?
If your Brother Printer displays 'Fuser Error', it means the fuser unit's temperature isn't rising to the specified level within the needed time. Turn the power off, wait a few seconds, and then turn it back on. Leave the machine on for 15 minutes.
Why does my Brother Printer say 'Cooling Down Wait for a while'?
If your Brother Printer shows 'Cooling Down Wait for a while', the drum unit or toner cartridge is too hot. Ensure the fan is spinning and the exhaust outlet isn't blocked. If the fan works, clear any obstructions around the exhaust and let the machine sit for several minutes. If the fan doesn’t spin, disconnect the power for several minutes, then reconnect it.
General| Type | all in one |
|---|---|
| Color | black |
| Automatic Document Feeder Capacity | 35 sheets |
| Paper Size | plain paper, thin paper, thick paper, thicker paper, recycled paper, bond, label, envelope, thin envelope, thick envelope, glossy paper |
| Paper Handling | up to 300 sheets |
| Color Print Speed | 25 pages per minute |
| Mono Print Speed | 25 pages per minute |
| Print Resolution Mono | up to 2400 x 600 |
| Print Resolution Color | up to 2400 x 600 |
| Maximum Number of Pages Per Month | up to 40, 000 |
| Scan Resolution | up to 1200 x 2400 |
| Copier Resolution Mono | up to 2400 x 600 |
| Number Of Cartridges | 4 |
| Internal Memory | yes |
| Memory Card | no |
| Network | wired |
| Connectivity | usb 2.0 |
| OS Compatibility | none |
| Mobile Devices Connection | yes |
Weight and Dimensions| Height | 19.4 inches |
|---|---|
| Width | 19.8 inches |
| Net Weight | 58.4 pounds |
To Next Page