Brother MFC-9840CDW - Page 230

214
7.LAN
(continued)
1.Wired
(continued)
1.TCP/IP
(continued)
8.DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address
of the primary or
secondary DNS server.
See
Network
User’s
Guide on
the
CD-ROM.
9.APIPA On*
Off
Automatically allocates
the IP address from the
link-local address range.
0.IPv6 On
Off*
Enable or Disable the
IPv6 protocol. If you
want to use the IPv6
protocol, visit
http://solutions.brother.
com for more
information.
2.Ethernet — Auto*
100B-FD
100B-HD
10B-FD
10B-HD
Chooses the Ethernet
link mode.
3.Set to
Default
1.Reset — Restore the wired
network setting to
factory default.
2.Exit —
4.Wired Enable On*
Off
Enable or Disable the
Wired LAN manually.
2.WLAN 1.TCP/IP 1.BOOT Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best suits
your needs.
2.IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
3.Subnet Mask [000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet mask.
4.Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
5.Node Name BRWXXXXXX Enter the Node name.
Main
Menu
Submenu Menu Selections Options Descriptions Page