Brother MFC-9840CDW - Switching Users

Chapter 4
32
Switching Users 4
This setting allows a restricted user to log on
the machine when Secure Function Lock is
turned on.
Note
After a restricted user has finished using
the machine, it will return to the Public
setting within the same time as the Mode
Timer setting (Menu, 1,1). (See Mode
timer on page 22. Also, you can exit from
an individual user by pressing the lighted
Mode key.)
a Hold down Shift as you press Secure.
Function Lock
Change User
PIN:XXXX
Pls enter PIN
b Enter your four-digit password.
Press OK.
When Copy mode is disabled:
a Press Copy key.
Access Denied
PIN:
Pls enter PIN
b Enter your four-digit password.
Press OK.
When Scan mode is disabled:
a Press Scan key.
Access Denied
PIN:
Pls enter PIN
b Enter your four-digit password.
Press OK.