Brother MFC-9840CDW - Page 47

Security features
31
4
Setting up restricted users 4
You can set up users with restrictions and a
password.
a Press Menu, 1, 9, 2.
19.Security
2.Function Lock
a Lock OffiOn
b Set Password
Select ab or OK
b Press a or b to select Setup User.
Press OK.
c Enter the administrator password.
Press OK.
19.Security
Setup User
a Public
b User01
Select ab or OK
d Press a or b to select User01.
Press OK.
e Use the numeric keys to enter the user
name. (See Entering text on page 219.)
Press OK.
f Enter a four-digit password for the user.
Press OK.
g Press a or b to select Enable or
Disable for Fax Tx.
Press OK.
After you have set Fax Tx, repeat this
step for Fax Rx, Copy(Color),
Copy(B&W) and Scan.
Press OK.
h Repeat d to g for entering each
additional user and password.
i Press Stop/Exit.
Note
You cannot use the same password as
another user’s password.
Turning Secure Function Lock on/off 4
If you enter the wrong password when
following the instructions below, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning Secure Function Lock on 4
a Press Menu, 1, 9, 2.
19.Security
2.Function Lock
a Lock OffiOn
b Set Password
Select ab or OK
b Press a or b to select Lock OffiOn.
Press OK.
c Enter your four-digit administrator
password.
Press OK.
Turning Secure Function Lock off 4
a Press Menu, 1, 9, 2.
19.Security
2.Function Lock
a Lock OniOff
b Change User
Select ab or OK
b Press a or b to select Lock OniOff.
Press OK.
c Enter your four-digit administrator
password.
Press OK.