Brother MFC-9840CDW - Dialing and Storing Numbers

57
8
8
How to dial 8
You can dial in any of the following ways.
Manual dialing 8
Use the dial pad to enter all the digits of the
telephone or fax number.
One-touch dialing 8
Press the One-Touch key that stores the
number you want to call. (See Storing
one-touch dial numbers on page 59.)
To dial One-Touch numbers 21 to 40, hold
down Shift as you press the One-Touch key.
Speed-dialing 8
Hold down Shift as you press
Search/Speed Dial, and then enter the
three-digit Speed-Dial number. (See Storing
speed-dial numbers on page 60.)
Three-digit number
Note
If the LCD shows Not Registered
when you enter a One-Touch or a
Speed-Dial number, it means that a
number is not stored there.
Dialing and storing numbers 8