Brother MFC-9880 - Using Brother TWAIN Scanner Driver with Your Apple Macintosh

120 Chapter 16
Using Brother TWAIN Scanner Driver with
Your Apple
®
Macintosh
®
The Brother MFC Software Suite includes a TWAIN Scanner driver for Macintosh
®
. This
Macintosh
®
TWAIN Scanner driver can be used with applications that support the TWAIN
specification. You can use PaperPort for scanning.
Accessing the Scanner
Run your Macintosh TWAIN-compliant application software. The first time you use the Brother
Twain driver, set it as default by choosing the Select Source. Afterwards, for each document you
scan choose Acquire Image or select Scan. The scanner setup dialog box will appear.
Scanning a Document into Your Macintosh G3, G4 or iMac
1 Insert the document face up in the Automatic Document Feeder, or face down on the glass
platen, again.
2 Adjust the following settings, if needed, in the scanner setup dialog box:
Resolution
Colour Type
Brightness
Contrast
Scanning Area
3 Click Start.
When scanning is finished, the image will appear in your graphics application.