Brother MFC-9880 - Making Enlarged or Reduced Copies

Making Copies 53
COPIER
Making Enlarged or Reduced Copies
1 Insert the document face up in the Automatic Document Feeder, or face down on the glass
platen.
2 Using the dial pad, enter the number of copies you want (up to 99).
3 Press Enlarge/Reduce.
4 Press or to choose an enlargement or reduction ratio.
You can reduce to 71%, 50% or 25% of the original size by pressing key.
—OR—
You can enlarge to 141%, 150%, 200% or 400% by pressing key.
—OR—
You can press or
to select MANUAL and use the dial pad to enter an enlargement or
reduction ratio between 25% and 400%. For example, press 5, 3 to enter 53%.
5 Press Set.
6 Press Copy—OR—Press or for additional settings.
Copy Contrast
You can adjust copy contrast to make copies darker or lighter.
1 Insert the document face up in the Automatic Document Feeder, or face down on the glass
platen.
2 Using the dial pad, enter the number of copies you want (up to 99).
3 Press Contrast.
4 Press to make a copy lighter, or to make a copy
darker, and then press Set.
5 Press Copy—OR—Press or for additional settings.
Special Copy Options (2 in 1, 4 in 1 or Poster) are not available with
Enlarge/Reduce.
– +
SELECT { } & SET