Making Copies 57
COPIER
Paper Type
You can use the following types of paper for copying. For the best print quality, select the type of
media that you are using.
1
Press Options and or to select PAPER TYPE, and then press Set.
2
Press or to select your type of paper, and then press Set.
3
Press Copy—OR—Press or for additional settings.
Changing Default Settings
Press Menu, 3 to change default settings for Copy mode. These settings will remain until you
change them again by pressing Menu. Adjust the Copy Mode and Contrast and Paper Type settings.
By pressing a number, you can adjust copy settings as shown in the following chart. Press or
to move through the selections for each setting. Press Set to save your selection. Press Stop/Exit
—OR—Press to select the next setting you want to change.
Press Menu, and 3.
THIN (60-69 gsm) For thin paper
PLAIN (70-95 gsm) For ordinary plain paper
THICK (96-120 gsm) For heavy weight paper or rough paper
THICKER (121-161 gsm) For heavier weight paper, rough paper or bond paper
TRANSPARENCY For transparency (OHP)
TEXT
1.COPY MODE
2.CONTRAST
– +
is default
AUTO
PHOTO
PLAIN
THICK
THICKER
3.PAPER TYPE
THIN
To Next Page
Loading...
