Brother MFC-J2330DW User Manual

Difficulties Suggestions
Vertical black lines when sending. Black vertical lines on faxes you send are typically caused by dirt or correction
fluid on the glass strip. Clean the glass strip.
See Related Information: Clean the Scanner.
Related Information
• If You Are Having Difficulty with Your Machine
• Set Dial Tone Detection
• Telephone Line Interference/VoIP
• Troubleshooting
• Set Tone or Pulse Dialling Mode
• Choose the Correct Receive Mode
• Set Fax Detect
• Set the Number of Rings Before the Machine Answers (Ring Delay)
• Connect an External TAD
• External TAD (Telephone Answering Device)
• Set the Telephone Line Type
• Print Reports
• Clean the Scanner
• Turn Off Memory Receive
• Print a Fax Stored in the Machine's Memory
• Cancel a Fax in Progress
• Check and Cancel a Pending Fax
• Load Documents in the Automatic Document Feeder (ADF)
• Load Documents on the Scanner Glass
654

Brother MFC-J2330DW Specifications

General

Print Technology	Inkjet
Functions	Print, Copy, Scan, Fax
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Scan Resolution	1200 x 2400 dpi
Fax Speed	33.6 kbps
Max Print Resolution	4800 x 1200 dpi
Print Speed (Black)	22 ppm
Print Speed (Color)	20 ppm
Duplex Printing	Automatic
Display	2.7" Touchscreen
ADF Capacity	50 sheets
Supported Paper Sizes	A3, A4
Operating System Support	Windows, macOS, Linux
Scanner Type	Flatbed, ADF
Mobile Printing	Brother iPrint&Scan, AirPrint, Google Cloud Print
Ink Cartridges	Black, Cyan, Magenta, Yellow
Paper Input Capacity	250 sheets