Level 1 Level 2 Level 3 Level 4 Descriptions
WLAN WLAN Status SSID
- View the current SSID.
Comm. Mode
- View the current
Communication Mode.
MAC Address
- - View the machine's MAC
address.
Wi-Fi Direct Push Button
- - Configure your Wi-Fi Direct
network settings using the
one-button push method.
PIN Code
- - Configure your Wi-Fi Direct
network settings using WPS
with a PIN code.
Manual
- - Configure your Wi-Fi Direct
network settings manually.
Group Owner
- - Set your machine as the
Group Owner.
Device
Information
Device Name
- View your machine's device
name.
SSID
- View the Group Owner's
SSID.
When the machine is not
connected, the LCD displays
Not Connected.
IP Address
- View your machine's current
IP Address.
Status
Information
Status
- View the current Wi-Fi Direct
network status.
Signal
- View the current Wi-Fi Direct
network signal strength.
When your machine acts as
Group Owner, the LCD always
indicates a strong signal.
I/F Enable
- - Turn the Wi-Fi Direct
connection on or off.
NFC
(MFC-J5930DW)
- - - Turn the NFC function on or
off.
E-mail/IFAX
(Available after Internet
Fax (I-Fax) is
downloaded.)
Mail Address
- - Enter the email address.
(Up to 60 characters)
Setup Server SMTP Server
Enter the SMTP server name
and address.
Port
Enter the SMTP port number.
Auth. for SMTP
Select the Security method for
email notification.
SSL/TLS
Send or receive an email via
an email server that requires
secure SSL/TLS
communication.
Verify
Certification
Verify the SMTP Server
Certificate automatically.
POP3/IMAP4 Protocol
Select the protocol for
receiving an email from the
server.
767
To Next Page
Loading...
Need help?
General
