ControlCenter3
80
3
PC-FAX (MFC models only) 3
The PC-FAX option lets you send and receive faxes. You can also configure the address book and change
some general machine settings.
These buttons are for sending or receiving faxes using the Brother PC-FAX application.
Send
Lets you scan a page or document and automatically send the image as a fax from the PC using the
Brother PC-FAX software. (See PC-FAX sending on page 88.)
Receive (Not available for MFC-J220, MFC-J265W, MFC-J270W, MFC-J410W and MFC-J415W)
By clicking this button, the PC-FAX receive software is activated and your PC starts receiving fax data from
your Brother machine. After activating the PC-FAX option, the icon name changes to View Received
which when clicked will open an application and display the received faxes. Before using the PC-FAX
Receive option, you must select the PC-FAX Receive option from the control panel menu of the Brother
machine. (See PC-FAX receiving (Not available for MFC-J220, MFC-J265W, MFC-J270W, MFC-J410W
and MFC-J415W) on page 102.)
Address Book
Lets you open the Brother PC-FAX address book. (See Brother Address Book on page 95.)
Setup
Lets you configure the PC-FAX settings. (See Sending setup on page 89.)
PC-FAX supports Letter or Legal Black and White faxing only.
To Next Page
Loading...
Need help?
General
