Brother PC-FAX Software (MFC models only)
102
5
PC-FAX receiving (Not available for MFC-J220, MFC-J265W,
MFC-J270W, MFC-J410W and MFC-J415W) 5
The Brother PC-FAX Receive Software lets you view and store faxes on your PC. It is automatically installed
when you install the MFL-Pro Suite and works on locally or network connected machines.
When enabled, your machine will receive faxes in its memory. Once it has received the fax, it will
automatically be sent to your PC.
If you turn your PC off, your machine will continue to receive and store your faxes in its memory. The machine
LCD will display the number of stored faxes received, for example:
When you switch your PC on, the PC-FAX Receive Software automatically transfers your faxes to your PC.
To enable the PC-FAX Receive Software, do the following:
Before you use the PC-FAX Receive function, you must choose PC-FAX Receive from the menu on the
machine.
Run the Brother PC-FAX Receive software on your PC. (We recommend you select the Add to Startup
folder check box, so that the software automatically runs and can transfer any faxes on PC startup.)
• See Troubleshooting in the Basic User’s Guide or visit the Brother Solutions Center
(http://solutions.brother.com/) for more information.
• To use PC-FAX receiving with a Windows
®
XP, Windows Vista
®
and Windows
®
7 computer that is
protected by a firewall, the Network PC-FAX receiving program must be excluded from the firewall setting.
If you are using Windows
®
Firewall and you installed MFL-Pro Suite from the CD-ROM, the necessary
Firewall settings have already been made. For more information, see Firewall settings (For Network users)
on page 110.
To Next Page
Loading...
Need help?
General
