29
For Wireless Network Users
Wireless Network
For methods b and c, start your wireless setup by pressing the Wi-Fi
®
button on the Touchscreen.
b Manual setup from the control panel using the Setup Wizard (Windows
®
, Macintosh and
mobile devices)
If your wireless access point/router does not support WPS (Wi-Fi Protected Setup™) or AOSS™,
write down the wireless network settings of your wireless access point/router in the area below.
If you need assistance during setup and want to contact Brother Customer Service, make sure
you have your SSID (Network Name) and Network Key ready. We cannot assist you in locating
this information.
Item Record the current wireless network settings
SSID (Network Name)
Network Key*
* The Network Key may also be described as the Password, Security Key, or Encryption Key.
If you do not know this information (SSID and Network Key), you cannot continue the wireless
setup.
How can I find this information?
1) Check the documentation provided with your wireless access point/router.
2) The initial SSID could be the manufacturer’s name or the model name.
3) If you do not know the security information, please consult the router manufacturer, your system
administrator, or your Internet provider.
page 31
c
One-push setup using WPS or AOSS™ (Windows
®
, Macintosh and mobile devices)
Use this method if your wireless access point/router supports automatic wireless (one-push) setup
(WPS or AOSS™).
page 33
To Next Page
Loading...
Need help?
General
