Brother MFC-J415W - LCD Display; Changing LCD Language; Setting the DIM Timer for the Backlight

Chapter 1
2
LCD display 1
Changing LCD language 1
You can change the LCD language.
a Press Menu.
b Press a or b to choose
Initial Setup.
Press OK.
c Press a or b to choose
Local Language.
Press OK.
d Press a or b to choose your language.
Press OK.
e Press Stop/Exit.
Setting the Dim Timer for the
backlight 1
You can set how long the LCD backlight stays
on after you go back to the Ready screen.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
d Press a or b to choose Dim Timer.
e Press d or c to choose 10Secs,
20Secs, 30Secs or Off.
Press OK.
f Press Stop/Exit.