Brother MFC-J415W

Printing photos from a memory card or USB Flash memory drive
15
4
Enhance Photos 4
You can edit and add effects to your photos
and view them on the LCD before printing.
Note
• After adding each effect, you can enlarge
the view of the image by pressing +. To go
back to the original size, press + again.
• The Enhance Photos feature is
supported by technology from Reallusion,
Inc.
Auto Correct 4
Auto Correct is available for most photos. The
machine decides the suitable effect for your
photo.
a Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (PHOTO CAPTURE).
b Press a or b to choose
Enhance Photos.
Press OK.
c Press d or c to choose your photo.
Press OK.
d Press a or b to choose Auto Correct.
Press OK.
Note
•If Remove Red-Eye appears on the LCD,
press a to attempt to remove red-eye from
your photo.
• Press Clear to undo the effect.
e Press OK. Then press + or - repeatedly
to enter the number of copies you want.
f Do one of the following:
 Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 20.)
 If you do not want to change any
settings, press Colour Start to print.
Enhance Skin-Tone 4
Enhance Skin-Tone is best used for adjusting
portrait photographs. It detects human skin
colour in your photos and adjusts the image.
a Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (PHOTO CAPTURE).
b Press a or b to choose
Enhance Photos.
Press OK.
c Press d or c to choose your photo.
Press OK.
d Press a or b to choose Enhance Skin.
Press OK.
e Do one of the following:
 Press OK if you do not want to
change any settings.
 Press a or b to adjust the effect level
manually. Press OK when you have
finished.
f Press + or - repeatedly to enter the
number of copies you want.
g Do one of the following:
 Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 20.)
 If you do not want to change any
settings, press Colour Start to print.