Brother MFC-J415W

58
Network
(Continued)
WLAN
(Continued)
TCP/IP
(Continued)
APIPA On*
Off
Automatically
allocates the IP
address from the
link-local address
range.
Setup Wizard — — You can manually
configure your
print server for a
wireless network.
WPS/AOSS — — You can easily
configure your
wireless network
settings using the
one-button push
method.
WPS w/PIN Code — — You can easily
configure your
wireless network
settings using
WPS with a PIN
code.
WLAN Status Status — You can see the
current wireless
network status.
Signal — You can see the
current wireless
network signal
strength.
SSID — You can see the
current SSID.
Comm. Mode — You can see the
current
Communication
Mode.
MAC Address — — You can see your
machine’s Mac
address from the
control panel.
Network I/F — Wired LAN*
WLAN
— You can choose
the network
connection type.
Network Reset — Yes
No
— Restores all wired
and wireless
network settings
to the factory
default.
Level1 Level2 Level3 Level4 Options Descriptions
See Network User's Guide.
The factory settings are shown in Bold with an asterisk.