Chapter 1
8
Entering Text 1
When you must enter text into the machine, a
keyboard appears on the Touchscreen.
Press to cycle between letters,
numbers and special characters.
To change between lowercase or
uppercase, press .
Inserting spaces 1
To enter a space, press Space or you can
press c to move the cursor.
The characters that are available may
differ depending on your country.
Making corrections 1
If you entered an incorrect character and
want to change it, press d to move the cursor
to highlight the incorrect character, and then
press . Enter the correct character. You
can also use the cursor to go back and insert
characters.
To erase all the characters, press
repeatedly.
To Next Page
Loading...
