Brother MFC-J4620DW

Chapter 10
28
d Enter the fax number.
Using the dial pad on the
Touchscreen
Using (Address Book)
 Address Book
Using (Call History)
 Redial
 Outgoing Call
 Caller ID history
NOTE
• To preview a fax message before sending
it, set Preview to On.
(See Online User’s Guide.)
• If your network supports the LDAP
protocol you can search for fax numbers
and email addresses on your server.
(See Online User’s Guide.)
e Press Fax Start.
Faxing from the ADF 10
 The machine starts scanning the
document to be sent.
Faxing from the scanner glass 10
 If you select Mono in
Colour Setting (default setting),
the machine starts scanning the first
page. Go to step f.
 If you select Colour in
Colour Setting, the
Touchscreen asks if you want to
send a colour fax. Press
Yes (Colour fax) to confirm.
The machine dials and sends the
page.
f When the Touchscreen displays
Next Page?, do one of the following:
 To send a single page, press No.
The machine sends the document.
 To send more than one page, press
Yes and go to step g.
g Place the next page on the scanner
glass.
Press OK.
The machine scans the page. (Repeat
steps f and g for each additional
page.)
Stop faxing 10
To stop faxing, press .
How to store numbers 10
Store fax and telephone numbers in your
machine’s Address Book or create Groups of
fax recipients so you can broadcast a fax to
many people at once.
NOTE
If you lose electrical power, stored
Address Book numbers will not be lost.
Storing a pause 10
When storing Address Book numbers, you
can insert one or more 3.5 second pauses by
pressing Pause on the Touchscreen.
Storing Address Book
numbers 10
Store up to 100 Addresses with a name; each
name can have two numbers.
a Press (Fax).