Brother MFC-J4620DW

Printing photos from a memory card or USB flash drive
25
8
l Press Print Settings to change the
paper type and paper size.
 Swipe up or down or press a or b to
display Paper Type and press it,
and then press the option you want.
 Swipe up or down or press a or b to
display Paper Size and press it,
and then press the option you want.
Change other print settings if needed.
When finished, press OK.
m Press Start.
n Wait until the message on the
Touchscreen disappears after printing,
and then remove the memory card or
USB flash drive from the media slot.
PhotoCapture Center
print settings overview
8
You can temporarily change the print settings
for the next print.
The machine returns to its default settings
after printing.
NOTE
You can save the print settings you use
most often by setting them as the default.
(See Online User’s Guide.)