Loading paper
11
2
g Check that the paper is flat in the tray
and below the maximum paper
mark (1).
Overfilling the paper tray may cause
paper jams.
h Close the output paper tray cover.
i Slowly push the paper tray completely
into the machine.
j Pull out the paper support (1) until it
locks into place, and then unfold the
paper support flap (2).
k Change the paper size setting in the
machine’s menu, if needed.
(See Set Paper Size and Type
on page 14.)
Loading paper in the
manual feed slot
2
Use the manual feed slot to load special print
media, one sheet at a time.
The manual feed slot cannot be used for
printing faxes.
Paper size and loading orientation 2
The paper size determines the orientation
when loading paper in the manual feed slot.
See the details in this chapter.
For information about other paper sizes,
see Online User’s Guide.
2
1
Manual feed slot
A4
Letter
Executive
Landscape orientation
A3
Ledger
Legal
A5
A6
Photo
Photo L
Photo 2L
Index card
Envelope
Portrait orientation
To Next Page
Loading...
