Brother MFC-J625DW - Control Panel and LCD Interface; Control Panel Overview

Chapter 3
8
Changing fax resolution 3
The quality of a fax can be improved by
changing the fax resolution.
a Press (FAX).
b Press Options.
c Press s or t to display
Fax Resolution.
d Press Fax Resolution.
e Press s or t to display the resolution
options, and then press the option you
want to set.
Note
You can choose four different resolution
settings for monochrome faxes and two
for colour.
If you choose S.Fine or Photo and then
use the Colour Start key to send a fax,
the machine will send the fax using the
Fine setting.
Setting your changes as a
new default 3
You can save the settings for the fax options
you use most often by setting them as default,
such as Fax Resolution, Contrast,
Glass ScanSize, and Real Time TX.
These settings will remain until you change
them again.
a Press (FAX).
b Press Options.
c Press s or t to choose the menu option
that you want to change. Press your new
option.
Repeat this step for each setting you
want to change.
d After changing the last setting, press
s or t to display Set New Default.
e Press Set New Default.
f Press OK.
g Press Yes.
h Press Stop/Exit.
Monochrome
Standard Suitable for most typed
documents.
Fine Good for small print and
transmits a little slower than
Standard resolution.
S.Fine Good for small print or artwork
and transmits slower than Fine
resolution.
Photo Use when the document has
varying shades of grey or is a
photograph. Photo has the
slowest transmission.
Colour
Standard Suitable for most typed
documents.
Fine Use when the document is a
photograph. The transmission
time is slower than Standard
resolution.