15
4
4
Memory Receive
(Monochrome only)
4
You can only use one Memory Receive
operation at a time:
Fax Forwarding
Fax Storage
PC-Fax Receive
Off
You can change your selection at any time. If
received faxes are still in the machine’s
memory when you change the Memory
Receive operation, a message will appear on
the LCD. (See Changing Memory Receive
operations uu page 18.)
Out of Paper Reception 4
As soon as the paper tray becomes empty
during fax reception, the LCD shows
No Paper Fed. Put some paper in the
paper tray. (uuBasic User’s Guide: Loading
paper and other print media)
If you don't put paper in the paper tray, the
machine will carry on receiving the fax, with
the remaining pages being stored in memory,
if enough memory is available.
Further incoming faxes will also be stored in
memory until the memory is full. To print the
faxes, put fresh paper in the tray. When the
memory is full, the machine will stop
automatically answering calls.
Fax Forwarding 4
When you choose Fax Forward, your
machine stores the received fax in the
memory. The machine will then dial the fax
number you have programmed and forward
the fax message.
a Press Menu.
b Press s or t to display Fax.
c Press Fax.
d Press s or t to display
Setup Receive.
e Press Setup Receive.
f Press s or t to display
Memory Receive.
g Press Memory Receive.
h Press s or t to display Fax Forward.
i Press Fax Forward.
j Enter the forwarding number (up to
20 digits) by pressing the buttons on the
Touchscreen.
Press OK.
k Press Backup Print:On or
Backup Print:Off.
Receiving a fax
(MFC models only)
4
To Next Page
Loading...
