Brother MFC-J625DW - Restoring Fax Settings to the Factory Default; Additional Sending Operations; Sending a Fax Manually

Sending a fax (MFC models only)
9
3
Restoring fax settings to the
factory default 3
You can restore all the fax settings you have
changed to the factory default. These settings
will remain until you change them again.
a Press (FAX).
b Press Options.
c Press s or t to display
Factory Reset.
d Press Factory Reset.
e Press Yes.
f Press Stop/Exit.
Additional sending
operations
3
Sending a fax manually 3
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
Note
To send a multiple page fax, use the ADF.
a Press (FAX).
b Load your document.
c To listen for a dial tone, pick up the
handset of the external telephone.
d Dial the fax number using the external
telephone.
e When you hear the fax tone, press
Mono Start or Colour Start.
If you are using the scanner glass, press
Send on the Touchscreen to send the
fax.
f Replace the handset of the external
phone.