EasyManua.ls Logo

Brother MFC-J625DW - Cleaning the Paper Feed Rollers

Brother MFC-J625DW
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Routine maintenance
55
A
Cleaning the paper feed
rollers A
If the paper feed rollers are stained with ink, it
may cause paper feed problems.
a Unplug the machine from the electrical
socket. Pull the paper tray (1)
completely out of the machine.
Note
If the paper support flap is open, close it,
and then close the paper support.
b Clean the front side of the Paper Feed
Rollers (1) with a soft lint-free cloth
slightly moistened with water, using a
side-to-side motion.
After cleaning, wipe the rollers with a
dry, soft lint-free cloth to remove all
moisture.
c Lift the Jam Clear Flap (2), and then
clean the back side of the Paper Feed
Rollers (1) with a soft lint-free cloth
slightly moistened with water.
After cleaning, wipe the rollers with a
dry, soft lint-free cloth to remove all
moisture.
d Put the paper tray firmly back in the
machine.
e Re-connect the power cord.
Note
Do not use the machine again until the
rollers are dry completely. Using the
machine before the rollers are dry may
cause paper feed problems.
1
1
2
1

Table of Contents

Other manuals for Brother MFC-J625DW

Related product manuals