Brother MFC-J625DW - General Information

General setup
3
1
LCD display 1
Changing LCD language
(DCP models only) 1
You can change the LCD language.
a Press Menu.
b Press s or t to display
Initial Setup.
c Press Initial Setup.
d Press s or t to display
Local Language.
e Press Local Language.
f Press your language.
g Press Stop/Exit.
LCD Contrast 1
You can adjust the LCD contrast. If you are
having difficulty reading the LCD, try
changing the contrast setting.
a Press Menu.
b Press s or t to display
General Setup.
c Press General Setup.
d Press s or t to display
LCD Settings.
e Press LCD Settings.
f Press s or t to display
LCD Contrast.
g Press LCD Contrast.
h Press d to increase the contrast and
press c to decrease the contrast.
Press OK.
i Press Stop/Exit.
Setting the Dim Timer for the
backlight 1
You can set how long the LCD backlight stays
on after the last key press.
a Press Menu.
b Press s or t to display
General Setup.
c Press General Setup.
d Press s or t to display
LCD Settings.
e Press LCD Settings.
f Press s or t to display Dim Timer.
g Press Dim Timer.
h Press 10Secs, 20Secs, 30Secs or
Off.
i Press Stop/Exit.