Receiving a fax (MFC models only)
23
4
Setup to receive polling with secure
code
4
Secure Polling lets you restrict who can get
the documents you set up to be polled.
Secure Polling only works with Brother fax
machines. If you want to get a fax from a
secured Brother machine you have to enter
the secure code.
a Press (FAX).
b Press Options.
c Press s or t to display Polling RX .
d Press Polling RX.
e Press s or t to display Secure.
f Press Secure.
g Enter a four-digit secure code by
pressing the buttons on the screen.
This is the same as the security code of
the fax machine you are polling.
Press OK.
h Enter the fax number you are polling by
either using a Speed Dial or the dial pad
on the control panel.
i Press Mono Start or Colour Start.
Setup to receive delayed polling 4
Delayed polling lets you set the machine to
begin polling receive at a later time. You can
only set up one delayed polling operation.
a Press (FAX).
b Press Options.
c Press s or t to display Polling RX.
d Press Polling RX.
e Press Timer.
f Enter the time (in 24-hour format) you
want to start polling.
For example, enter 21:45 for 9:45 PM.
Press OK.
g Enter the fax number you are polling by
either using a Speed Dial or the dial pad
on the control panel.
h Press Mono Start or Colour Start.
The machine makes the polling call at
the time you entered.
To Next Page
Loading...
