Network Scanning
196
13
Configuring the Scan to Network Default Settings 13
a Choose Network in Scan to FTP/Network from the Scan tab. Press Submit.
b Choose the Profile you want to configure in Scan to FTP/Network Profile.
c Enter the name that you want to use for the Scan to Network profile. This name will be displayed on the
LCD of the machine and can be up to 15 characters.
d The Host Address is the domain name of the CIFS server. Enter the Host Address (for example
ftp.example.com) (up to 64 characters) or the IP address (for example 192.23.56.189).
To Next Page
Loading...
