Brother MFC-J6510DW

Scanning
49
2
Pre-Scanning and cropping a portion using the scanner glass 2
The Preview button is used to preview an image for cropping any unwanted portions from the image. When
you are satisfied with the preview, click Scan in the Scan dialog box to scan the image.
a Follow the steps from a to e of Scanning a document into the PC on page 47.
b Put the document face down on the scanner glass.
c Choose Flatbed from the Source drop-down list. Adjust the following settings, if needed, in the Scanner
dialog box.
d Click Preview.
The whole image is scanned into the PC and appears in the scanning area.
e Press and hold down the left mouse button and drag it over the portion you want to scan.
f Click Scan on the Scan dialog box.
The machine starts scanning the document.
This time only the chosen area of the document appears in your application window.