Brother MFC-J6510DW - Printing the Scanned Image; Opening the Scanned Image with an Application; Attaching the Scanned Data to E-Mail

ControlCenter4
61
3
Printing the scanned image 3
You can scan a page on the machine and print copies using any of the features of the ControlCenter4
supported Brother machine’s printer driver.
a Select the Scan tab.
b Configure the settings in PC Scan setting area.
c Click Scan.
d Confirm and edit (if necessary) the scanned image in the image viewer.
e Click Print.
f Configure the print settings and then click Start Printing.
Opening the scanned image with an application 3
The Open with an Application button lets you scan an image directly into your graphics application for
image editing.
a Select the Scan tab.
b Configure the settings in PC Scan setting area.
c Click Scan.
d Confirm and edit (if necessary) the scanned the image in image viewer.
e Click Open with an Application.
f Select the application from the drop-down list and click OK.
g The image will appear in the application you have chosen.
Attaching the scanned data to E-mail 3
The Send E-mail button lets you scan a document to your default E-mail application, so you can send the
scanned job as an attachment.
a Select the Scan tab.
b Configure the settings in the PC Scan setting area.
c Click Scan.
d Confirm and edit (if necessary) the scanned image in the image viewer.
e Click Send E-mail.
f Configure the attached file settings and click OK.