Brother MFC-J6510DW

Scanning
47
2
Scanning a document using the WIA driver
(Windows
®
Photo Gallery and Windows
®
Fax and Scan users)2
Scanning a document into the PC 2
There are two ways to scan a whole page. You can either use the ADF (automatic document feeder) or the
Flatbed scanner glass.
If you want to scan and then crop a portion of a page after pre-scanning the document, you must scan using
the scanner glass (Flatbed). (See Pre-Scanning and cropping a portion using the scanner glass on page 49.)
a Load your document.
b Open your software application to scan the document.
c Do one of the following:
 (Windows
®
Photo Gallery)
Click File, then Import from Camera or Scanner.
 (Windows
®
Fax and Scan)
Click File, New, then Scan.
d Choose the scanner you want to use.
e Click Import.
The Scan dialog box appears.