Chapter 2
16
l Close the output paper tray cover and
slowly push the paper tray into the
machine.
m Pull out the paper support (1) until it
clicks and unfold the paper support
flap (2).
If you are finished using A3, Ledger or
Legal size paper and want to use a
smaller paper size, take the paper out of
the tray. Then shorten the tray by pressing
the universal guide release button (1).
Adjust the paper length guide (2) to fit the
paper size you are going to use. Then put
the smaller paper into the tray.
1
2
To Next Page
Loading...
