EasyManuals Logo

Brother MFC-L8850CDW User Manual

Brother MFC-L8850CDW
260 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #140 background imageLoading...
Page #140 background image
130
Cover is Open. The front cover is not
completely closed.
Close the front cover of the machine.
The fuser cover is not
completely closed or paper
was jammed in the back of the
machine when you turned on
the power.
Close the fuser cover located inside the
back cover of the machine.
Make sure paper is not jammed behind the
fuser cover at the back of the machine, then
close the fuser cover and press Start
(see Paper is jammed at the back of the
machine on page 142).
The ADF cover is not
completely closed.
Close the ADF cover of the machine.
The ADF cover is open while
loading a document.
Close the ADF cover of the machine, then
press .
DIMM Error The DIMM is not installed
correctly.
The DIMM is broken.
The DIMM does not meet
the required specifications.
Turn off the machine and unplug the power
cord. Remove the DIMM. (See Advanced
User's Guide)
Confirm the DIMM meets the required
specifications. (See Advanced User's
Guide)
Reinstall the DIMM correctly. Wait a few
seconds, plug in the power cord, and then
turn the machine on again.
If this error message appears again,
replace the DIMM with a new one.
(See Advanced User's Guide)
Disconnected The other person or other
person’s fax machine stopped
the call.
Try to send or receive again.
Document Jam The document was not
inserted or fed correctly, or the
document scanned from the
ADF was too long.
See Document is jammed in the top of the ADF
unit on page 138 or Using the automatic
document feeder (ADF) on page 38.
DR Mode in Use
(Except New Zealand)
The machine is set to
Distinctive Ring mode. You
cannot change the Receive
Mode from Manual to another
mode.
Set Distinctive Ring to Off (see Telephone
Service for Australia on page 53 or Distinctive
Ringing (For Singapore and Hong Kong)
on page 57).
Drum End Soon The drum unit is near the end
of its life.
Order a new drum unit before you get a
Replace Drum message.
Drum ! The corona wires on the drum
unit must be cleaned.
Clean all four corona wires inside the drum unit
by sliding the blue tab (see Cleaning the
corona wires on page 114).
The drum unit is not installed
correctly.
Remove the drum unit, remove the toner
cartridges from the drum unit, and reinstall the
toner cartridges back into the drum unit.
Reinstall the drum unit back in the machine.
Error Message Cause Action

Table of Contents

Other manuals for Brother MFC-L8850CDW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-L8850CDW and is the answer not in the manual?

Brother MFC-L8850CDW Specifications

General IconGeneral
Typeall in one
Colorwhite
Tray Capacity300
Automatic Document Feeder Capacity50 sheets
Paper Size8.5"x14"
Paper Handlingup to 300 sheets
Color Print Speed32 pages per minute
Mono Print Speed32 pages per minute
Print Resolution Colorup to 2400 x 600
Maximum Number of Pages Per Monthunknown
Scanner Typeflatbed
Scan Resolutionup to 2400 x 1200
Copier Resolution Monoup to 600 x 600
Copier Resolution Colorup to 600 x 600
Cartridgestn331bk, tn331c, tn331m, tn331y
Number Of Cartridges4
Internal Memoryyes
Memory Cardno
Networkwired, wireless
Connectivityusb, google cloud print
OS Compatibilitywindows, mac os, linux
Mobile Devices Connectionyes
Weight and Dimensions IconWeight and Dimensions
Height19.3 inches
Width20.7 inches
Net Weight67.4 pounds

Related product manuals