Chapter 7
62
Turning on the Remote Codes 7
You must turn the Remote Codes setting to
On to use the Remote Activation Code and
Remote Deactivation Code.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Receive.
f Press Setup Receive.
g Swipe up or down, or press a or b to
display Remote Codes.
h Press Remote Codes.
i Press Remote Codes.
j Press On.
k If you do not want to change the Remote
Activation Code, press on the
Touchscreen.
l Press .
Changing the Remote Codes 7
The preset Remote Activation Code is l51
(l91 for New Zealand). The preset Remote
Deactivation Code is #51 (#91 for New
Zealand). If you are always disconnected
when accessing your External TAD, try
changing the three-digit remote codes, for
example ### and 555.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Receive.
f Press Setup Receive.
g Swipe up or down, or press a or b to
display Remote Codes.
h Press Remote Codes.
i Do one of the following:
If you want to change the
Remote Activation Code, press
Act.Code. Enter the new code, and
then press OK.
If you want to change the
Remote Deactivation Code, press
Deact.Code. Enter the new code,
and then press OK.
If you do not want to change the
Codes, go to step j.
If you want to turn the Remote Codes
On or Off, press Remote Codes.
Press On or Off.
j Press .
To Next Page
Loading...
Need help?
General
Weight and Dimensions
