93
B
B
Troubleshooting B
For technical help, you must call the country where you bought the machine. Calls must be
made from within that country.
If you are having difficulty with your machine B
If you think there is a problem, check the chart below and follow the troubleshooting tips. You can
solve most problems by yourself.
If you need additional help, the Brother Solutions Center offers the latest FAQs and
troubleshooting tips.
Visit us at http://solutions.brother.com/
.
Troubleshooting and routine
maintenance
B
Printing or receiving faxes
Difficulties Suggestions
Condensed print
Horizontal streaks
Top and bottom sentences are
cut off
Missing lines
Usually this is caused by a poor telephone connection. If your copy looks good,
you probably had a bad connection, with static or interference on the telephone
line. Ask the other party to send the fax again.
Poor print quality See Improving the print quality on page 100.
Vertical black lines when receiving The corona wire for printing may be dirty. Clean the corona wire. (See Cleaning
the corona wire on page 122.)
The sender’s scanner may be dirty. Ask the sender to make a copy to see if the
problem is with the sending machine. Try receiving from another fax machine.
If the problem continues, call Brother Customer Service at 1-877-BROTHER
(1-877-276-8437) (in USA) or 1-877-BROTHER (in Canada).
Received faxes appear as split or
blank pages.
If the received faxes are divided and printed on two pages or if you get an extra
blank page, your paper size setting may not be correct for the paper you are using.
(See Paper size on page 20.)
Turn on auto reduction. (See Printing a reduced incoming fax on page 43.)
To Next Page
Loading...
Need help?
General
