Name: Brother MFC MFC-7840W
Brand: Brother
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Chapter 6

Easy receive 6

Turning easy receive On allows the machine

to receive fax calls automatically if you lift any

handset on the same line as the machine.

When you see Receiving on the LCD or

when you hear ‘chirps’ through the handset of

an extension telephone connected to another

telephone wall jack, just replace the handset

and your machine will receive the fax.

If this feature is set to On, but your machine

does not connect a fax call when you lift the

handset of an extension or external

telephone, press the Fax Receive Code l51.

(See Operation from extension telephones

on page 50.)

Note

If you use a modem, or send faxes from a

computer, on the same line and your

machine intercepts them, set easy receive

to Off.

a Make sure you are in Fax mode .

b Press Menu, 2, 1, 3.

Setup Receive

3.Easy Receive

c Press a or b to choose On or Off.

Press OK.

d Press Stop/Exit.

Setting the print density 6

You can adjust the print density to make your

printed pages darker or lighter.

a Make sure you are in Fax mode .

b Press Menu, 2, 1, 6.

Setup Receive

6.Print Density

c Press a to make the print darker.

Or, press b to make the print lighter.

Press OK.

d Press Stop/Exit.

Questions and Answers:

Need help?

Do you have a question about the Brother MFC MFC-7840W and is the answer not in the manual?

Brother MFC MFC-7840W Specifications

General