Name: Brother MFC MFC-7840W
Brand: Brother
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Chapter 8

Dialing access codes and

credit card numbers 8

You can combine more than one Quick Dial

number when you dial. This feature may be

useful if you need to dial an access code for

a cheaper rate from another long distance

carrier.

For example, you might have stored ‘555’ on

Speed Dial #003 and ‘7000’ on Speed Dial

#002. You can use them both to dial

‘555-7000’ if you press the following keys:

Press Search/Speed Dial, 003. Press

Search/Speed Dial, 002 and Start.

Numbers can be added manually by entering

them on the dial pad:

Press Search/Speed Dial, 003, 7001 (on the

dial pad), and Start.

This would dial ‘555–7001’. You can also add

a pause by pressing the Redial/Pause key.

Pause 8

Press Redial/Pause to insert a 3.5-second

pause between numbers. You can press

Redial/Pause as many times as needed to

increase the length of the pause.

Tone or pulse (Canada only) 8

If you have a Pulse dialing service, but need

to send Tone signals (for example, for

telephone banking), follow the instructions

below. If you have Touch Tone service, you

will not need this feature to send tone signals.

a Press Hook.

b Press # on the machine’s control panel.

Any digits dialed after this will send tone

signals.

When you hang up, the machine will

return to the Pulse dialing service.

Questions and Answers:

Need help?

Do you have a question about the Brother MFC MFC-7840W and is the answer not in the manual?

Brother MFC MFC-7840W Specifications

General