Brother MFC MFC-7840W User Manual

120
d Plug the machine’s power cord back into
the AC power outlet first, and reconnect
all cables and telephone line cord. Turn
on the machine’s power switch.
Note
In addition to cleaning the scanner glass
and glass strip with a soft lint-free cloth
moistened with water, run your finger tip
over the glass to see if you can feel
anything on it. If you feel dirt or debris,
clean the glass again concentrating on
that area. You may need to repeat the
cleaning process three or four times. To
test, make a copy after each cleaning.
Cleaning the laser scanner
window B
WARNING
DO NOT use isopropyl alcohol to clean the
laser scanner window.
CAUTION
DO NOT touch the laser scanner window
with your fingers.
a Before you clean the inside of the
machine, turn off the machine’s power
switch.
Unplug the telephone line cord first, and
then unplug the power cord from the AC
power outlet.
b Open the front cover and slowly take out
the drum unit and toner cartridge
assembly.
WARNING
HOT SURFACE
After you have just used the machine, some
internal parts of the machine will be
extremely hot. When you open the front or
back cover (back output tray) of the
machine, DO NOT touch the shaded parts
shown in the illustration. If you do this, you
may get burned.

Brother MFC MFC-7840W Specifications

General

Print Technology	Laser
Print Resolution	Up to 2400 x 600 dpi
Paper Capacity	250 sheets
ADF Capacity	35 sheets
Scan Resolution	Up to 19200 x 19200 dpi (interpolated)
Fax Modem Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Maximum Copying Resolution	600 x 600 dpi
Optical Scan Resolution	600 x 2400 dpi
Wireless	Yes
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Display	LCD
Weight	25.6 lbs
Connectivity	USB, Wireless
Scanner Type	Flatbed
Connectivity Technology	Wireless, USB
Printer Type	All-in-One
Scan Type	Flatbed, ADF