Brother MFC MFC-7840W User Manual

Chapter 6
40
Using receive modes 6
Some receive modes answer automatically
(Fax Only and Fax/Tel). You may want to
change the ring delay before using these
modes. (See Ring delay on page 41.)
Fax Only 6
Fax Only mode will automatically answer
every call as a fax.
Fax/Tel 6
Fax/Tel mode helps you automatically
manage incoming calls, by recognizing
whether they are fax or voice calls and
handling them in one of the following ways:
 Faxes will be automatically received.
 Voice calls will start the F/T ring to tell you
to pick up the line. The F/T ring is a fast
double ring made by your machine.
(Also see F/T ring time (Fax/Tel mode only)
on page 41 and Ring delay on page 41.)
Manual 6
Manual mode turns off all automatic
answering functions unless you are using the
Distinctive Ring Receive feature.
To receive a fax in Manual mode press Start
when you hear fax tones (short repeating
beeps). You can also use the Easy Receive
feature to receive faxes by lifting a handset on
the same line as the machine.
(Also see Easy receive on page 42.)
External TAD 6
External TAD mode lets an external
answering device manage your incoming
calls. Incoming calls will be handled in the
following ways:
 Faxes will be automatically received.
 Voice callers can record a message on the
external TAD.
(For more information see Connecting an
external TAD (telephone answering device)
on page 47.)

Brother MFC MFC-7840W Specifications

General

Print Technology	Laser
Print Resolution	Up to 2400 x 600 dpi
Paper Capacity	250 sheets
ADF Capacity	35 sheets
Scan Resolution	Up to 19200 x 19200 dpi (interpolated)
Fax Modem Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Maximum Copying Resolution	600 x 600 dpi
Optical Scan Resolution	600 x 2400 dpi
Wireless	Yes
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Display	LCD
Weight	25.6 lbs
Connectivity	USB, Wireless
Scanner Type	Flatbed
Connectivity Technology	Wireless, USB
Printer Type	All-in-One
Scan Type	Flatbed, ADF