Brother MFC MFC-7840W User Manual

Making copies
75
12
i Place the next page on the scanner
glass.
Press OK.
Repeat h and i for each page of the
layout.
j After all the pages have been scanned,
press 2 in h to finish.
If you are copying from the ADF: 12
Insert your document face up in the direction
shown below:
 2 in 1 (P)
 2 in 1 (L)
 4 in 1 (P)
 4 in 1 (L)
If you are copying from the scanner
glass:
12
Insert your document face down in the
direction shown below:
 2 in 1 (P)
 2 in 1 (L)
 4 in 1 (P)
 4 in 1 (L)
Out of memory
message
12
If the memory becomes full while you are
making copies, the LCD message will guide
you through the next step.
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Start to copy the
pages scanned so far, or to press Stop/Exit
to cancel the operation.
To gain extra memory, you can do the
following:
 Print the faxes that are in the memory.
(See Printing a fax from the memory
on page 43.)
 You can turn off Fax Storage. (See
Turning off remote fax options
on page 60.)
Note
When you get an Out of Memory
message, you may be able to make
copies if you first print incoming faxes in
the memory to restore the memory to
100%.

Brother MFC MFC-7840W Specifications

General

Print Technology	Laser
Print Resolution	Up to 2400 x 600 dpi
Paper Capacity	250 sheets
ADF Capacity	35 sheets
Scan Resolution	Up to 19200 x 19200 dpi (interpolated)
Fax Modem Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Maximum Copying Resolution	600 x 600 dpi
Optical Scan Resolution	600 x 2400 dpi
Wireless	Yes
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Display	LCD
Weight	25.6 lbs
Connectivity	USB, Wireless
Scanner Type	Flatbed
Connectivity Technology	Wireless, USB
Printer Type	All-in-One
Scan Type	Flatbed, ADF