Name: Brother MFC MFC-7840W
Brand: Brother
Rating: 4 (1 reviews)

To Next Page

To Previous Page

110

Out of Memory The machine’s memory is full. Fax sending or copy operation in

progress

Do one of the following:

 Press Start to send or copy the scanned

pages.

 Press Stop/Exit and wait until the other

operations in progress finish, and then try

again.

 Clear the data from the memory. (See

Out of memory message on page 38 or

page 75.)

Print operation in process

Do one of the following:

 Reduce print resolution. (See Advanced

tab in the Software User’s Guide on the

CD-ROM.)

 Clear the faxes from the memory. (See

Out of memory message on page 75.)

Print Unable XX The machine has a mechanical

problem.

Do one of the following:

 (MFC-7440N only)

See Transferring your faxes or Fax

Journal report on page 111 before

disconnecting the machine so you will

not lose any important messages.

Then, disconnect the machine from the

power for several minutes and then

reconnect it.

 (MFC-7840W only)

Disconnect the machine from the power

for several minutes, then reconnect it.

(The machine can be turned off for

approximately 4 days without losing

faxes stored in the memory. See

Transferring your faxes or Fax Journal

report on page 111.)

Error Message Cause Action

Questions and Answers:

Need help?

Do you have a question about the Brother MFC MFC-7840W and is the answer not in the manual?

Brother MFC MFC-7840W Specifications

General