Brother MFC6800 - Front Cover

4-31
4.1.8 Front Cover
(1) Press the rear ends of the front cover inwards (in the direction of arrow ) to release bosses
"a" from the front cover guides.
(2) Remove the screw from each of the front cover guides.
(3) While pulling the tab of each front cover guide up and to the front (in the direction of arrow
) to release the guide from boss "b," remove the guide in the direction of arrow .
n Reassembling Notes
• When setting the front cover guides back into place, fit sections "y" and "x" into "Y" and "X" of
the scanner mount, respectively, while pushing the guides down and to the front.