Brother MFC6800 - 5.1 Entry into the Maintenance Mode

5-1
5.1 ENTRY INTO THE MAINTENANCE MODE
For machines w/ fax
To make the machine enter the maintenance mode, press the Menu, *, 2, 8, 6, and 4 keys in this
order.
For machines w/o fax
To make the machine enter the maintenance mode, press the Menu, 0, 2, 8, 6, and 4 keys in this
order.
The machine beeps for approx. one second and displays "
" on the LCD,
indicating that it is placed in the initial stage of the maintenance mode, a mode in which the
machine is ready to accept entry from the keys.
To select one of the maintenance-mode functions listed in Section 5.2, enter the corresponding 2-
digit function code with the numerical keys on the control panel. (The details of each maintenance-
mode function are described in Section 5.3.)
NOTES: • Pressing the 9 key twice in the initial stage of the maintenance mode makes the machine
exit from the maintenance mode, restoring it to the standby state.
• Pressing the Stop key after entering only one digit restores the machine to the initial stage
of the maintenance mode.
• If an invalid function code is entered, the machine resumes the initial stage of the
maintenance mode.
Within 2 seconds
Within 2 seconds