5-2
5.2 LIST OF MAINTENANCE-MODE FUNCTIONS
Maintenance-mode Functions
Function
Code
Function
Reference
Subsection
(Page)
01 EEPROM Parameter Initialization
5.3.1 (5-4)
05 Printout of Scanning Compensation Data
5.3.2 (5-5)
06 Movement of CCD Unit to the Transport Position
5.3.2A (5-6-1)
08 ADF* Performance Test
5.3.3 (5-7)
09 Test Pattern 1
5.3.4 (5-8)
10 Firmware Switch Setting
5.3.5 (5-9)
11 Printout of Firmware Switch Data
5.3.5 (5-11)
12 Operational Check of LCD
5.3.6 (5-12)
13 Operational Check of Control Panel PCB
(Check of Keys and Buttons)
5.3.7 (5-12)
32 Sensor Operational Check
5.3.8 (5-14)
54 Fine Adjustment of Scanning Start/End Position
5.3.9 (5-15)
55 CCD Scanner Area Setting
5.3.10 (5-16)
74 EEPROM Customizing
5.3.11 (5-16)
80 Display of the Machine's Log Information
5.3.12 (5-17)
82 Machine Error Code Indication
5.3.13 (5-18)
87 Output of Transmission Log to the Telephone Line
5.3.14 (5-18)
91 EEPROM Parameter Initialization (except the telephone
number storage area)
5.3.1 (5-4)
99 Exit from the Maintenance Mode
----- (5-1)
* ADF: Automatic document feeder
To Next Page
Loading...
