4-64
4.3 PERIODICAL REPLACEMENT PARTS
Parts listed below require to be replaced periodically in order to assure the product quality. Even if
it seems that those parts are not damaged in appearance, replace them at regular intervals specified
below.
The replacement procedure is given in Section 4.1 "DISASSEMBLY/REASSEMBLY."
Parts Name Q’ty
Replacement Interval
(Number of prints in
terms of A4 size)
For the replacement
procedure, refer to:
Heat-fixing unit 1 50,000 pages Subsection 4.1.12
Paper pull-in roller 1 50,000 pages
Separation pad ASSY 1 50,000 pages
Subsection 4.1.11
(Illustration on page 4-36)
NOTE: The above table gives only the reference values.
To Next Page
Loading...
