Brother NX-2000 - Returning to the Beginning of the Pattern

EDITING STITCH PATTERNS
Character/Decorative Stitches
111
4
Returning to the Beginning of the
Pattern
When sewing character/decorative stitches, you can
return to the beginning of the pattern after trial sewing
or when the stitching is sewn incorrectly.
a
Press the “Start/Stop” button to stop the
machine, and then press .
→ Sewing returns to the beginning of the selected
pattern (“W”) from the point where sewing was
stopped.
b
Press the “Start/Stop” button to continue
sewing.
Memo
This function is not available for the stitches in the
category.
Memo
If this key is pressed when sewing is stopped, patterns
can be added at the end of a combined stitch pattern.
(In this example, “!” is added.)