LCD SCREEN
Getting Ready
21
1
Using the Machine Operation Mode Key
Basic machine operations and other information based on the contents of this Operation Manual are stored in this
machine.
Press to open the screen shown below. Six categories are displayed at the top of the screen. Press a key to
see more information about that category.
■ Contents of Each Category
Names of Machine Parts and Their Functions Sewing Basics Troubleshooting
Presser foot lever
Sewing speed controller
Handwheel
Flat bed attachment with
accessory compartment
Knee lifter
Foot controller
Upper threading
Bobbin winding
Changing the needle
Changing the presser foot
Setting the bobbin
Main Buttons Useful Functions Maintenance
“Thread Cutter” button
“Presser Foot Lifter” button
“Start/Stop” button
“Reverse/Reinforcement Stitch”
button
“Needle Position” button
Pivoting
Automatic drop feed
Automatic fabric sensor system
Cleaning the race and bobbin case
To Next Page
Loading...
Need help?
General
