EasyManuals Logo

Brother NX-2000 User Manual

Brother NX-2000
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
LOWER/UPPER THREADING
30
Using the Twin Needle
Using the twin needle, you can sew two parallel lines of
the same stitch. Although the same bobbin thread is
used, interesting patterns can be sewn by threading
each needle with a different color of thread. Both upper
threads should have the same thickness and quality.
The twin needle can only be used with patterns where
appears when they are selected. Check the
“STITCH SETTING CHART” at the end of this manual
for patterns that can be used with the twin needle.
a
Press , and then install the twin
needle (see “CHANGING THE NEEDLE” on
page 33).
b
Thread the machine for the first needle
according to the procedure for threading a
single needle (see “Upper Threading” on page
27).
c
Pass the thread through the needle bar thread
guide, and then manually thread the needle
on the left side.
* Do not use needle threader when threading a twin needle.
a Needle bar thread guide
d
Set the supplemental spool pin in the “up”
position.
a Supplemental spool pin
e
Place the additional spool of thread on the
supplemental spool pin so that the thread
unwinds from the front. Then, slide the spool
cap as far as possible onto the supplemental
spool pin to secure the thread spool.
a Spool cap
b Supplemental spool pin
c Thread spool
f
While holding the thread from the spool in
your right hand, hold the end of the thread
with your left hand, and then pass the thread
through the thread guide.
* Do not pass the thread through the bobbin winding thread
guide.
a Bobbin winding thread guide
b Thread guide
CAUTION
Use only twin needles made for this machine (part
code X59296-151). Other needles could break,
resulting in damage.
Be sure to set the twin needle mode when using the
twin needle. Using the twin needle while the
machine is in single needle mode could cause the
needle to break, resulting in damage.
Do not sew with bent needles. The needle could
break and cause injury.
When using the twin needle, be sure to use presser
foot “J”. In case bunched stitches may occur, use the
presser foot “N”.
a
a
a
b
c
a
b

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother NX-2000 and is the answer not in the manual?

Brother NX-2000 Specifications

General IconGeneral
BrandBrother
ModelNX-2000
CategorySewing Machine
LanguageEnglish

Related product manuals